140g * 4 pack containerdesiccant
Container Dri II (referred to as CD II) is produced by SUD-CHEMIC from Germany（Southern ChemistryDuring the long-distance transportation or storage of containers in Singapore, the huge temperature difference between day and night at sea locks the container during the daycontainerThe high-temperature air rich in water vapor inside reaches supersaturation at night due to the decrease in temperature,containerOften experiencing high humidity in the ocean and strong diurnal temperature differences, temperature changes can range from 0 ℃ to 80 ℃, with temperatures reaching up to 98%, which is known as condensation phenomenon. When the temperature is 30 ℃, the water content in the air is 30.4g\/m3. When the temperature drops from 30 ℃ to 18 ℃, the water vapor content will decrease to 15.4 g\/m3. The other water vapor condenses into water, if it's 40 feetcontainerThen 1000g of condensate water is generated, commonly known as&quo; Container Rain; Causing a very negative impact on the packaging image of the goods Container Drier2desiccantProduce a new type of compositedesiccantEspecially suitable for container transportation, its main component is montmorillonite. Under the condition of 25 ℃ and relative humidity of 80%, the maximum capacity of absorbing water vapor can exceed 280%, achieving the highest performance of similar foreign products. And pure montmorillonitedesiccantAt 25 ℃ and a relative humidity of 80%, the adsorption capacity is generally not greater than 30%. This kind of compositedesiccantWhile maintaining the characteristics of montmorillonite, it greatly improves the drying and dehumidification performance
Product usage method: Simply place it in different directions inside the container. The specific quantity depends on the type of goods, packaging materials, transportation cycle, climate changes during transportation (temperature and humidity changes), moisture-proof standards, etc. Generally, a 20 foot container（container）Determine by adsorbing 8-16 kilograms of water vapor as needed, if using CD2 with an adsorption capacity of 280%desiccantThen 3-4 kilograms need to be placeddesiccantCD2 is packed in 24-32 packs (125g per pack), with a 40 foot boxdesiccantThe dosage will be doubled.
Product application: ContainerdesiccantIn addition to being used in container ocean transportation, it can also be applied in container aviation, railway, road transportation, and cargo storage. It can also be directly applied in moisture-proof packaging of large machinery, electronics, communication and other equipment.
Our CD2 has the following characteristics:
1. Easy to absorb, each pack weighs only 140 grams.
2. High moisture absorption characteristics, with a moisture absorption rate of no less than 280%.
3. The improved new packaging adopts one-way transmission technology, allowing moisture to enter the packaging and fully contact with CD2, while the condensed water and gel cannot seep out.
4. New welding edge sealing technology completely prevents edge damage.
5. It will not cause potential pollution to high-value goods.
6. Absolute safety, CD2 does not contain any toxic substances.
7. It has a long usage period, usually up to 3-4 months, and can be reused after being sun dried.
8. The post-use processing is simple and does not require any special recycling, only a regular garbage collection program.