4 * 125g CLARIANT new packaging container desiccant for adhesive backing
Product Introduction:Container Dri II, abbreviated as CD II, was acquired by CLARIANT Klein through the acquisition of SUD-CHEMIC from Southern GermanyProduced by the company, originating from the United States; During the long-distance transportation or storage of containers, the huge temperature difference between day and night at sea causes the containers to be locked during the dayThe high-temperature air rich in water vapor inside often experiences high humidity in the ocean and strong diurnal temperature differences at night due to the decrease in temperature. The temperature changes can range from 0 ℃ to 80 ℃, with temperatures reaching up to 98%. This is known as condensation phenomenon. When the temperature is 30 ℃, the water content in the air is 30.4g\/m3. When the temperature drops from 30 ℃ to 18 ℃, the water vapor content will decrease to 15.4 g\/m3. The other water vapor condenses into water. If the container is 40 feet tall, it will produce 1000g of condensate, which is commonly known as&quo; Container Rain; Causing a very negative impact on the packaging image of the goods
Container Dri II produces a new type of desiccant composite, particularly suitable for container transportation. Under conditions of 25 ℃ and relative humidity of 80%, the maximum capacity for adsorbing water vapor can exceed 280%, achieving the highest performance of similar foreign products.
Product usage method: Simply place and paste in different directions inside the container. The specific quantity depends on the type of goods, packaging materials, transportation cycle, climate changes during transportation (temperature and humidity changes), moisture prevention standards, etc. Generally, a 20 foot container needs to adsorb 8-16 kilograms of water vapor. If container Dri II desiccant with an adsorption capacity of 280% is used, 3-4 kilograms need to be placed, that is, container Dri II needs to use 6 kilograms; 8 pieces of 4-pack 560 grams, using 12 for a 40 foot box; 16 pieces in 4 packs, 560 grams. Peel off the sticker behind the adhesive and stick it onto the surface of the container and the outer surface of the cargo.
Product applicationAnd characteristics :Container Dri II can not only be used in container ocean transportation, but also in container aviation, railway, road transportation, and cargo storage. It can also be directly applied in moisture-proof packaging of large machinery, electronics, communication and other equipment.
1. Easy to absorb, each pack weighs only 125 grams, with 4 consecutive packs weighing 500 grams
2. High moisture absorption characteristics, with a moisture absorption rate of no less than 300%.
3. The improved new packaging adopts one-way transmission technology, allowing moisture to enter the packaging and fully contact with CD2, while the condensed water and gel cannot seep out.
4. New welding edge sealing technology completely prevents edge damage.
5. It will not cause potential pollution to high-value goods.
6. It has a long usage period, usually up to 3-4 months, and can be reused after being sun dried.
sevenAbsolute safety, CD2 does not contain any toxic substances,Simple post-use processing without the need for any special recycling,
Just use a regular garbage collection program.